RED ORCHIDEA Instructions d'exploitation télécharger pdf (Page 33)

red

PELLET STOVES Chapter 4

INSTALLATION AND USE MANUAL

page 33

Operation Technical service - Rights reserved - Reproduction prohibited

abnormalities are found, it means that there may be a problem with the

stove components or that installation may not have been carried out

correctly.

REMOVE THE PELLETS FROM THE BURNER AND

CONTACT AN AUTHORISED TECHNICIAN.

4.8. SHUTDOWN MODE (Key D)

The stove is shutdown by pressing key D. From this moment a

completely automatic cooling phase begins which includes the

interruption of loading the fuel, cleaning the grate and the smoke

discharge conduit.

Such phase may last for a variable time according to how many hours

the stove has been lit and its position; during the first 10 minutes the

hot air fan switches off while the smoke ejector fan will run at minimum

until reaching a minimum default temperature (factory setting).

NEVER SHUTDOWN THE STOVE BY CUTTING OFF THE

MAINS.

Always leave it to complete the shutdown cycle,

otherwise damage could be caused to the structure,

and also problems with ignition in the future.

4.9. LOADING THE PELLETS

Fuel is loaded from the upper part of the stove by opening a door. Pour

the pellets in the hopper. When empty, it will hold slightly more than a

15 kg sack.

This is easier if performed in two steps:

 Pour half of the contents into the hopper and wait for the fuel

to settle on the bottom.

 Then pour in the rest

Never remove the protection grille in the hopper.

When filling, do not let the sack of pellets touch any

hot surfaces.

Do not place any type of fuel in the hopper other than

pellets that are compliant with the specifications

provided previously.

4.10. CHOOSING THE TYPE OF PELLET LOAD (Key E)

This operation allows the user to set the stove in the best way based

on the type of pellet available.

This prevents fuel waste, ensures expected heating ability and protects

the condition of the product.

Depending on the characteristics shown below (shape/colour/ nature of

flame) and user's experience (grate too full or too empty) it is possible

to use key E, respect to the factory default (0), to increase or decrease

pellet load.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

RED ORCHIDEA Instructions d'exploitation Page 33

Commentaires sur ces manuels