RED ORCHIDEA Instructions d'exploitation télécharger pdf (Page 22)

red

PELLET STOVES Chapter 3

INSTALLATION AND USE MANUAL

page 22

Installation and assembly Technical service - Rights reserved - Reproduction prohibited

Position the stove without its cladding and connect it to the flue pipe.

Use the four adjustable feet (J) to get the stove correctly levelled so

that the smoke outlet (S) is lined up with the connecting pipe (H) .

Once the operations for connection are complete, assemble the

cladding (ceramics or steel sides).

If the stove needs to be connected to a discharge pipe which goes

through the rear wall (to connect up with the flue), take the greatest

care to make sure that the joint is not stressed.

If the smoke outlet of the stove is forced or used

improperly to lift it or position it, the operation of the

stove can be damaged irreparably.

1. Turn the feet clockwise to

lower the stove

2. Turn the feet counter-

clockwise to lower the

stove

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Pas de commentaire

RED ORCHIDEA Instructions d'exploitation Page 22