RED DSMC Manuel de service télécharger pdf (Page 230)

Version 3.0

229

BACK FOCUS ADJUSTMENT

WARNING: THERE IS A SCREW-IN METAL PLUG INSTALLED IN THE CAMERA BODY COVERING

THE BACK FOCUS SCREW. THIS PLUG

MUST BE REMOVED

NOTE: To be able to perform this procedure as written, you must have a PL mount and RED

Focus™.

BEFORE TO PERFORMING A BACK

FOCUS ADJUSTMENT. TO REMOVE THE PLUG, USE A T-10 TORX DRIVER.

Back focus is adjusted by turning the back focus adjustment on the top of the camera’s front plate using

a T-10 Torx driver. This screw is indicated by a Siemens Star with an arrow pointing to its location.

Back Focus Adjustment Location – EPIC-M Shown, Scarlet-X Similar

1. Remove the screw-in plug located in the back focus adjustment opening using a T-10 Torx driver.

2. Place the camera on a level, stable surface or mount the camera on a tripod.

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 238 239

Pas de commentaire

RED DSMC Manuel de service Page 230