RED DSMC V5.2 Spécifications télécharger pdf (Page 24)

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-C | 24

4. Insert the HDMI connector into the DSMC BRAIN.

5. Use a T20 Torx driver to tighten four (4) captive screws. Tighten screws in a cross pattern approximately

two turns each. DO NOT FULLY TIGHTEN.

6. Fully tighten four (4) screws in a cross pattern. DO NOT OVERTIGHTEN.

Insert the HDMI Connector to

DSMC BRAIN

Tighten the screws in an “X” pattern

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 163 164

Pas de commentaire

RED DSMC V5.2 Spécifications Page 24